




The AE86 RC drift car is JXC Model’s 1:43 scale tribute to the car that turned the Toyota Sprinter Trueno into a legend – built under Toyota license and supplied factory-direct to importers, regional distributors, hobby chains and cross-border sellers. It arrives pre-assembled and pre-charged, so an end customer is drifting within a minute of opening the box, and a shop can sell it without running a demo.
Under the shell sit a 4WD drivetrain, a 180 brushed motor, a pre-installed 3.7V lithium battery and a 2.4GHz full proportional radio with a 50-meter range. Gyro stabilization holds the rear end in line, so the car slides instead of snapping into a spin – the difference between a toy that works on the first try and one that comes back as a return. Working headlights, tail lights, brake lights and left/right indicators join eight chassis lighting effects once the lights go down.
AE86 RC Drift Car Key Features
- Officially licensed by Toyota – authentic Sprinter Trueno livery, not a generic lookalike
- 1:43 scale with a 112mm body – sized for a desk, a shop counter or a display shelf
- 4WD drivetrain with gyro stabilization for controllable, repeatable drifts
- 180 brushed motor with full proportional throttle, not stepped on/off control
- 2.4GHz full proportional radio system, approximately 50m range
- Around 30 minutes of run time per charge, battery pre-installed
- Working headlights, tail lights, brake lights and left/right indicators
- 8 chassis lighting effects for night-time display and demo
- USB-C charging – no proprietary dock, no disposable batteries
- Transmitter with steering trim, throttle trim, gyro gain, light mode and high/low speed switch
- Pre-assembled and pre-charged: ready to run straight out of the box
- 2.4GHz band lets several cars run together without interference
Spec Sheet: What Distributors Verify
The data distributors verify before placing a first order:
| Scale | 1:43 (pre-assembled, ready to run) |
| Model | AE4386 |
| Body | White and black two-tone Sprinter Trueno livery |
| License | Officially licensed by Toyota |
| Category | Drift |
| Drive system | 4WD with gyro stabilization |
| Motor | 180 brushed motor |
| Battery | 3.7V lithium battery, pre-installed |
| Run time | Approximately 30 minutes |
| Frequency | 2.4GHz full proportional |
| Control range | Approximately 50m |
| Lighting | Headlights, tail lights, brake lights, indicators plus 8 chassis effects |
| Charging | USB-C |
| Body dimensions | 112 x 51 x 35 mm |
| In the box | Car body, 2.4GHz transmitter, battery, USB-C cable, manual and quick start guide |
Painting, decalling and assembly all happen inside our own Shenzhen plant, which is the difference between a product that arrives complete and one that generates missing-part messages you cannot answer from overseas. Before anything is packed, every batch runs through function checks on steering, throttle, drift gyro, lighting and charging. After-sales components can travel with your bulk order or follow separately, so a faulty unit becomes a repair rather than a total loss.
Scale is a margin decision. A 1:43 unit box is small, so more units fit into every carton and freight per unit falls with it. It also sells as a range: the AE86 opens the door, and buyers who start here routinely add the Supra and the LC80, then widen into our other drift models.
Certifications and Market Compliance
This model is produced in an ISO 9001 certified factory and carries the three certifications importers ask about first: CE, FCC and RoHS. Test reports, declarations of conformity and the customs paperwork your broker needs are available on request.
Toy-specific rules are where shipments stall, not general electronics rules. For the EU we can add CE-EN71 and EN62115, for Japan MIC, and for the Gulf GSO. Send your destination country with your enquiry and we will confirm which documents apply and book any extra testing before production starts – always cheaper than discovering the gap at the port.
Wholesale Terms: MOQ, Lead Time, Packaging and OEM
- MOQ: set by your model mix, not by a fixed figure. Tell us the volume you want to test and we will confirm what is possible.
- Samples: single units leave within days, with freight quoted before you approve.
- Bulk lead time: normally 15-25 days from deposit and packaging sign-off.
- Mixed shipments: pair this model with our PO4302 GT3 RS drift car, the Supra or the LC80 crawler and cover several price points in one container.
- OEM and ODM: your brand, your color box, your livery, and radio or speed settings tuned to your market.
- Shipping: DDP available for major markets, so your landed cost is fixed before you commit to volume.
Why Buyers Choose JXC Model
JXC Model Technology has built RC cars as an RC car wholesale manufacturer in Shenzhen since 2015. Design, tooling, painting, assembly and testing sit under one roof, and the result ships to more than 80 countries. A certified quality system is what makes the tenth container match the first.
We also manufacture officially licensed Toyota and Land Rover models. Brand owners audit the factories that make their products, so holding these licenses is evidence of a process rather than a slogan.
Ordering from us includes the assets you would otherwise commission: photography, video and listing copy ready to publish on arrival, spare parts support, and a sales contact who replies within hours whichever time zone you are in.
FAQ for Wholesale Buyers
What is the MOQ for the AE86 RC drift car (AE4386)?
There is no single published MOQ, because it depends on the model mix inside your order. Send your target quantity and destination country and we will confirm what can be produced – small first orders are common.
Is the AE86 RC drift car licensed and certified for my market?
It is manufactured in an ISO 9001 certified factory and carries CE, FCC and RoHS, with test reports on request. The Toyota license documentation, plus extra toy-specific testing such as CE-EN71, MIC or GSO, can be arranged for your destination before production.
Can we order it with our own packaging and branding?
Yes. Branded boxes, custom liveries and private-label artwork all fall inside our OEM and ODM service. Send artwork or a short brief and we will come back with tooling cost and a timeline.
What is the lead time for a bulk order?
Allow 15-25 days from deposit and packaging approval for bulk production. Samples move within days. The exact ship date is confirmed on the order.
Do you supply samples?
Samples are available as single units with freight quoted upfront. In practice most buyers evaluate one car and then order a mixed container across two or three different models.
Ready to Stock the AE86 RC Drift Car (AE4386)?
Send your company name, your market and the volume you have in mind. You will get distributor pricing, sample options and the liveries we can ship now. Already selling drift cars? Ask about the PO4302 GT3 RS and the Supra at the same time – buyers who start with a single drift model tend to come back for a third.
Request a wholesale quote for the AE86 RC drift car (AE4386), or ask what a sample unit costs. One message starts it.











